Guide
How to use LTE only (4G only) mode on Android
Does your phone keep jumping between 5G and 4G, or drop calls where the 5G signal is weak? LTE only mode, also called 4G only, tells your phone to stay on 4G and stop looking for 5G. This guide explains what it does, when it helps, when it hurts, and how to switch it on and off.
What LTE only mode means
Every phone has a setting called preferred network type. It tells the phone which kinds of mobile network it may use: 5G, 4G, 3G or 2G. LTE is the technical name for 4G, so "LTE only", "4G only" and "4G LTE" all point to the same idea: your phone uses 4G and does not try for 5G.
Some phones also keep 3G and 2G switched off in this mode. Others offer a choice such as "4G/3G/2G (auto)", which stops 5G but keeps the older networks as a back-up. The names depend on your phone maker, so read the options carefully.
One thing to remember: the setting is a request from your phone. Your carrier still decides which networks are available where you are.
When LTE only can help
- 5G keeps hopping to 4G and back. Each switch can cause a short pause in data or a blip in a call. Staying on 4G removes the hopping. Not sure that is your problem? Read why your phone keeps switching between 5G and 4G.
- 5G is weak indoors. Fast 5G uses radio waves that struggle to pass through walls, so the phone may cling to a poor 5G link when a steady 4G one is available.
- The battery drains in weak-5G areas. Searching for 5G and holding a weak 5G link can use more power. In areas where 5G is poor, many people find the battery lasts longer on 4G. Results vary by phone and place.
When LTE only can hurt
- You lose 5G speed. Where 5G is strong, it is usually faster than 4G.
- Calls may fail. With older networks off, voice calls must run over 4G calling, often called VoLTE or HD voice. If your carrier or plan does not support it on your phone, calls may not connect. Make a test call right after you switch.
- There is no back-up network. In a lift, a basement, the countryside or a new city there may be no 4G at all. With 3G and 2G off, you get no service where Auto would have found some.
- Travel. Abroad, your plan may not work on the local 4G network. Switch back to Auto before you go.
Which mode should you pick?
| Mode | Best for | Watch out for |
|---|---|---|
| 5G preferred | Places with strong, steady 5G | Hopping to 4G in patchy areas |
| 4G / LTE only | Patchy or weak 5G, steadier calls and data | Slower where 5G is strong; calls need 4G calling |
| Auto (the default) | Travel, new places, "just works" | The phone decides, so it may still hop |
How to switch to LTE only in Settings
- Open Settings.
- Tap Network & internet. On some phones it is called Connections or Mobile network.
- Tap SIMs and pick your SIM. With two SIMs, each one has its own setting.
- Tap Preferred network type.
- Choose LTE, 4G or LTE only.
- Wait a few seconds, then check that mobile data works and make a test call.
On many phones the path is Settings > Network & internet > SIMs > Preferred network type, but menu names differ by phone maker. Some phone makers hide this menu and some carriers lock it. If you cannot find it, you cannot change it this way.
The hidden testing menu
Many Android phones have a built-in testing menu with a more direct switch. Open the Phone (dialler) app and type *#*#4636#*#*. On many phones the menu opens by itself, with no call button needed. Then:
- Tap Phone information. On a dual-SIM phone, pick the SIM first.
- Find the drop-down called Set preferred network type.
- Choose LTE only from the list.
Be careful with this menu:
- It works on many phones, but not all. Some phone makers have removed it.
- The choices are technical. A wrong one, such as a 3G-only or 5G-only option, can leave you without service.
- Write down the value you see before you change it, so you can go back.
- On some phones the choice resets after a restart.
- Leave the other buttons alone.
How to go back to Auto
In Settings, open the same Preferred network type menu and pick the option marked "recommended". On a 5G phone that is usually the top one, with 5G in its name. In the testing menu, pick the value you wrote down.
If data or calls stop working after a change, go back to Auto first. Then turn airplane mode on for ten seconds, turn it off, and restart the phone if you need to.
A one-tap way: MaxBars
MaxBars is an Android app that sets your preferred network type in one tap: 5G + 4G, 4G only (LTE only) or Auto, for each SIM. It adds a tile and a widget, so you do not have to dig through menus. Keep My Mode shows a note when your phone leaves the mode you chose, and one tap puts it back. The speed test and Best Mode Here help you compare modes where you are standing.
MaxBars cannot add signal, make a weak network stronger, or give you 5G where your phone, plan or carrier does not offer it. It only chooses which networks your phone may use. Some phone makers and carriers hide or lock the network menu it uses, and Auto always puts your phone back the way it was. It needs Android 8.0 or newer and a SIM.
To check how strong your signal is before you change anything, read what the dBm numbers mean.
Questions and answers
Is LTE only the same as 4G only?
Yes. LTE is the technical name for 4G, so LTE only means your phone uses 4G and does not try for 5G. Some menus say "4G only" or just "LTE" instead.
Will LTE only make my internet faster?
Sometimes. It can feel faster and steadier where 5G is weak and keeps dropping, because the phone stops hopping between networks. Where 5G is strong, 5G is usually faster.
Does LTE only save battery?
It can in places with weak 5G, because the phone stops searching for 5G and holding a poor 5G link. Where 5G is strong the difference is small, and it varies from phone to phone.
Why can I not make calls in LTE only mode?
With older networks off, calls must run over 4G calling, often called VoLTE. If your carrier or plan does not support it on your phone, calls may fail, so switch back to Auto and ask your carrier.
Is the code *#*#4636#*#* safe to use?
It opens a built-in testing menu and is safe if you only change the preferred network type and write down the old value first. It does not work on every phone, and a wrong choice can cost you service until you set it back to Auto.